Debug Channels

From WineHQ Wiki
Revision as of 22:24, 17 January 2016 by RosanneDiMesio (Talk | contribs) (Initial import; fix some markup; table still needs to be fixed)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Translations of this page: [1][:DebugChannels_zhcn:简体中文]

WINEDEBUG is an environment variable that turns debugging messages on or off.

Syntax

WINEDEBUG=[class][+/-]channel[,[class2][+/-]channel2]

class is optional and can be one of the following: err, warn, fixme, or trace. If class is not specified, all debugging messages for the specified channel are turned on. Each channel will print messages about a particular component of Wine. The following character can be either + or - to switch the specified channel on or off respectively. If there is no class part before it, a leading + can be omitted. Note that __spaces are not allowed any where in the string__.

channel specifies which debug channel to turn on or off. For complete list of channels run this command in the source dir


grep -r --include='*.c' --include='*.h' 'WINE_\(DEFAULT\|DECLARE\)_DEBUG_CHANNEL' dlls/ programs/

And with some more work we have sorted and formatted list in BASH (you may want to adjust number 26 near the end of this composite to match your indentation taste):

for modname in $(find dlls/ programs/ -mindepth 1 -type d | sort); do
  echo $(grep -rE --include='*.[ch]' '^WINE_(DEFAULT|DECLARE)_DEBUG_CHANNEL' $modname \
         | awk -F "[()]" '{print $2}' | sort | uniq) \
         | awk -v modname=$modname '{if (NF>0) printf("%-*s%s\n", 26, modname": ", $0)}';
done

Examples

WINEDEBUG=warn+all
will turn on all warning messages.
WINEDEBUG=warn+dll,+heap
will turn on DLL warning messages and all heap messages.
WINEDEBUG=fixme-all,warn+cursor,+relay
will turn off all FIXME messages, turn on cursor warning messages, and turn on all relay messages (API calls).
WINEDEBUG=+relay
will turn on all relay messages. For more control on including or excluding functions and dlls from the relay trace look into the [HKCU\Software\Wine\Debug] registry key (See Useful Registry Keys and the example below).

List of Debug Channels

||<tableclass="CALSTABLE">accel ||acledit ||actctx ||activeds ||actxprxy ||adpcm ||advapi ||advpack ||alsa ||amstream || ||animate ||appbar ||appwizcpl ||aspi ||atl ||atom ||avicap ||avifile ||bidi ||bitblt || ||bitmap ||browseui ||button ||cabinet ||capi ||cards ||caret ||cdrom ||class ||clipboard || ||clipping ||clusapi ||cmd ||cmdlgtst ||combo ||comboex ||comm ||commctrl ||commdlg ||compstui || ||computername ||console ||coreaudio ||cred ||credui ||crtdll ||crypt ||cryptasn ||cryptdlg ||cryptdll || ||cryptnet ||cryptui ||ctapi32 ||curses ||cursor ||d3d ||d3d10 ||d3d11 ||d3d7 ||d3d8 || ||d3d9 ||d3d_caps ||d3d_constants ||d3d_decl ||d3d_draw ||d3drm ||d3d_shader ||d3d_surface ||d3d_texture ||d3dx || ||d3dx8 ||d3dxof ||datetime ||dbghelp ||dbghelp_coff ||dbghelp_dwarf ||dbghelp_msc ||dbghelp_stabs ||dbghelp_symt ||dc || ||dciman ||ddeml ||ddraw ||ddraw_thunk ||debug_buffer ||debugstr ||devenum ||dialog ||dinput ||dll || ||dma ||dmband ||dmcompos ||dmdump ||dmfile ||dmfileraw ||dmime ||dmloader ||dmscript ||dmstyle || ||dmsynth ||dmusic ||dmusic32 ||dnsapi ||dosmem ||dpa ||dplay ||dpnet ||dpnhpast ||dpvoice || ||driver ||ds ||dsa ||dsalsa ||dscapture ||dsound ||dsound3d ||dssenh ||dswave ||dwmapi || ||dxdiag ||edit ||eject ||enhmetafile ||environ ||event ||eventlog ||exec ||explorer ||faultrep || ||fiber ||file ||fixup ||font ||fps ||fusion ||g711 ||gdi ||gdiplus ||global || ||glu ||gpkcsp ||graphics ||handle ||header ||heap ||hid ||hlink ||hnetcfg ||hook || ||hotkey ||htmlhelp ||iccvid ||icm ||icmp ||icon ||imagehlp ||imagelist ||imm ||imports || ||inetcomm ||inetmib1 ||infosoft ||initpki ||inkobj ||inseng ||int ||int21 ||int31 ||io || ||ipaddress ||iphlpapi ||itircl ||itss ||jack ||joystick ||jscript ||key ||keyboard ||listbox || ||listview ||loaddll ||local ||localspl ||localui ||lsa ||mapi ||mci ||mciavi ||mcicda || ||mcimidi ||mciwave ||mdi ||menu ||menubuilder ||message ||metafile ||midi ||mixer ||mlang || ||mmaux ||mmio ||mmsys ||mmtime ||module ||monthcal ||mountmgr ||mpeg3 ||mpr ||mprapi || ||msacm ||mscat ||mscms ||mscoree ||msdmo ||msftedit ||msg ||msgbox ||mshtml ||msi || ||msidb ||msiexec ||msimg32 ||msimtf ||msisip ||msisys ||msnet ||msrle32 ||mssip32 ||mstask || ||msvcirt ||msvcr71 ||msvcrt ||msvcrt40 ||msvidc32 ||msvideo ||mswsock ||msxml ||nativefont ||nddeapi || ||netapi32 ||netbios ||newdev ||nls ||nonclient ||ntdll ||ntdsapi ||ntlm ||ntoskrnl ||ntprint || ||objsel ||odbc ||ole ||oleacc ||oledlg ||olemalloc ||olerelay ||olethk32 ||oleview ||opengl || ||openal32 ||pager ||palette ||pdh ||pidl ||powermgnt ||powrprof ||print ||printui ||process || ||profile ||progress ||propsheet ||propsys ||psapi ||psdrv ||pstores ||qcap ||qcap_v4l ||qedit || ||qmgr ||quartz ||query ||ras ||rebar ||recyclebin ||reg ||regedit ||region ||relay || ||resource ||resutils ||richedit ||richedit_check ||richedit_lists ||richedit_style ||rpc ||rpcss ||rundll32 ||sblaster || ||sccbase ||schannel ||scroll ||secur32 ||seh ||selector ||sensapi ||server ||service ||setupapi || ||sfc ||share ||shdocvw ||shell ||shlctrl ||slbcsp ||slc ||snmpapi ||snoop ||sound || ||spoolss ||spoolsv ||start ||static ||statusbar ||storage ||stress ||string ||svchost ||svrapi || ||sxs ||sync ||synchronous ||syslevel ||system ||systray ||tab ||tape ||tapi ||task || ||text ||theming ||themingcombo ||thread ||threadpool ||thunk ||tid ||time ||timestamp ||toolbar || ||toolhelp ||tooltips ||trackbar ||trash ||treeview ||twain ||typelib ||typelib2 ||uninstaller ||uniscribe || ||updown ||url ||urlmon ||user ||userenv ||uxtheme ||variant ||vdmdbg ||ver ||virtual || ||volume ||vxd ||wave ||wavemap ||wc_font ||wgl ||win ||wineboot ||winebrowser ||winecfg || ||wineconsole ||wine_d3d ||winedbg ||winedevice ||winemine ||winevdm ||wing ||winhelp ||winhttp ||wininet || ||winmm ||winscard ||winsock ||winspool ||winstation ||wintab ||wintab32 ||wintrust ||wldap32 ||wnet || ||wtsapi ||x11drv ||x11settings ||xcopy ||xdg ||xdnd ||xrandr ||xrender ||xvidmode ||

Useful Channels

Some of the debug channels can be particularly useful:

  • +all : logs everything, probably gives too much information in most cases, but may come in handy for subtle issues
  • +heap : traces all heap activity in the program and switches on constant integrity checks. If an app is trashing the heap, doing a +relay,+heap trace will let you narrow down exactly where it's happening. If an inconsistency is detected, Wine will dump the contents of the heap and terminate the program. Although many things can lead to trashing the heap, the most common is Wine overrunning an internal buffer. Be sure to remember this channel; most new Wine code uses the !HeapAlloc/HeapFree APIs internally, and a primary reason is that Wine's built in heap debugging is so useful.
  • +loaddll : reports each DLL as it's loaded. This is a good, lightwei-ght alternative if you don't have the Windows program Dependency Walker available.
  • +message : logs Windows messages
  • +msgbox : logs when message boxes are displayed
  • +olerelay : dumps calls made through the typelibrary marshaller. It's a bit like +relay but works for a certain class of DCOM calls that wouldn't normally show up. Unfortunately, while this can be useful especially for debugging InstallShield or DCOM issues, this isn't a general COM relay mechanism. Since InstallShield/DCOM issues are quite advanced, it's recommended you ask for help if you want to try using this channel.
  • +relay : logs every call that crosses the DLL boundary of Wine's built-in modules, including calls between (non-native) DLLs. This channel is often the first port of call when you have no idea what's going wrong. It shows you each call into and out of Wine modules at the DLL boundaries. If you're being overwhelmed by certain functions, look into setting the RelayInclude and RelayExclude strings in the Wine registry (under [HKCU\Software\Wine\Debug]). A good initial value for !RelayExclude is:
 RtlEnterCriticalSection;RtlLeaveCriticalSection;_EnterSysLevel;_LeaveSysLevel;
 _CheckNotSysLevel;RtlAllocateHeap;RtlFreeHeap;LOCAL_Lock;LOCAL_Unlock
These functions are called a lot, but don't usually give any clues as to why a program might be failing.
  • +seh : logs Windows exceptions (Structured Exception Handling). These are invoked either when an application performs an illegal operation (i.e. crashes), or if a program throws its own exceptions. Wine converts UNIX signals into SEH exceptions and outputs them using this channel. This can be useful because applications will often trap their own crash, in order to perform an emergency save for instance. The most common exception to watch for is STATUS_ACCESS_VIOLATION or 0xC0000005 which is the closest equivalent in Win32 to a segfault. You may also see codes which don't appear in the headers; these are typically language-specific exceptions used by whichever compiler was used to produce the EXE. E.g. 0xEEDFADE is the code for a Delphi internal exception, and 0xE06D7363 is a Microsoft Visual C++ exception, which has a magic value ({{{info[0]}}}) of 0x19930520, which is easy to remember because it looks like a date (and probably is). If you see any of these exceptions, it probably means a Win32 API call returned a non-zero error code somewhere.
  • +server : shows each wineserver RPC. You don't normally need this but it may prove helpful when debugging wineserver issues.
  • +snoop : logs every function call between native DLLs. This is similar to +relay but works between two native DLLs, although this channel provides poorer information because parameters aren't reported. +snoop may also break or destabilize an application as it inspects the stack and disassembles function prologues to try and guess parameters.
  • +synchronous : forces X11 into synchronous mode
  • +tid : prefixes each debug output line with the ID of the thread that generated it. This is invaluable for debugging multithreaded applications since a context switch can occur at any time and without it, there's often no way to tell exactly what's going on inside the program. If you aren't sure if a program is concurrent, enable it anyway. Although no channel is free, this one has a very cheap processing cost, and you can always disable it if you're only seeing one thread.
  • +timestamp: prefixes each debug output line with the timestamp when that line executed. This is invaluable for debugging performance issue.

Other Debugging Tips

  • If a program is displaying a message box when it fails, and you don't know what is causing the problem, try performing a +relay,+msgbox trace. Then open the debug log in your favourite editor or text viewer (less is quite good) and search for trace:msgbox. Look at the relay data before the MessageBox API call, although the problem may not be caused by a call that happens immediately before the error. Keep an eye out for failing API calls in particular, and remember that there's little consistency in the Windows API as to what return codes mean. You just have to get used to what the specific API uses, and while many return non-zero for success and zero for fail, some use the opposite convention.
  • If a program fails at startup with nothing to suggest why, you can use an +all trace. If your program seems to be failing a long way from an API call, you might also try [:Disassembly: disassembling] it to see if it's accessing some of the parameters passed in to !WinMain (for instance, Dungeon Keeper crashes if you run it without an absolute path for argv[0]).
  • If your logs are becoming too big to work with, try applying the [:Debug_trace_toggle_key: debug delay patch]. It lets you toggle logging on and off with the F12 key and also control the debug channels from within the source by using the libwine APIs.

Making +relay less verbose

If you're looking for a problem that happens a couple minutes into the run of an app, +relay can be too verbose. In that case, run it once, then send the log through a script like

# Make grep go fast
LANG=C
# Find top ten calls
freq=`grep ':Ret ' | sed 's/(.*//;s/.* //' | sort | uniq -c | sort -n | tail | awk '{print $2}' | tr '\012' ';'`
cat > quiet.reg << _EOF
REGEDIT4

[HKEY_CURRENT_USER\Software\Wine\Debug]
"RelayExclude"="ntdll.RtlEnterCriticalSection;ntdll.RtlLeaveCriticalSection;kernel32.48;kernel32.49;kernel32.94;kernel32.95;kernel32.96;kernel32.97;kernel32.98;$freq"

_EOF

wine regedit quiet.reg

This will tell Wine to not log the ten most frequent calls in your app, which should make your +relay log much more managable in size.

See Also

  • ["Debug_trace_toggle_key"] A patch to toggle tracing on and off while running an application
  • Environment Variables: WINEDEBUG - chapter of the Wine User Guide
  • WineAPI documentation - For each function the used debug channels are listed.
  • Bug 638 - Bug tracking documenting the debugging channel. Has a perl script to list all channels in a function.