Translations of this page: 简体中文
Sometimes updates to Wine, designed to fix bugs or introduce new features, cause unexpected new problems, called regressions. Since most users only update at new releases, hundreds of patches may be committed before someone notices the regression. This is where regression testing comes in.
By using the Git source control program and its bisect command specifically, debuggers can partially (or even fully in some cases) automate a binary search over Wine's revision history for the exact patch that causes the regression. For a more general article on using git and Wine together, see GitWine; this article is focused only on regression testing.
- Regression Testing
- Before You Start
- Running the Bisection
- Working with Developers
- Other Ideas
- See Also
Before You Start
A Cheap Alternative?
The Wine codebase is not small and takes some time to build so if you can pin down the problem patch by other means, you could save significant time and effort. One possibility is that the failure has been caught by Wine's suite of automatic ConformanceTests. If you have some idea of which components in Wine are failing, you can skim the automated test results for recent builds of Wine at http://test.winehq.org/data.
For instance, http://bugs.winehq.org/show_bug.cgi?id=28415 was narrowed down by looking at http://test.winehq.org/data/tests/winmm:midi.html. That's not often going to be possible, but when it is, it's easier than running a real regression test.
Setting Up a Source Repo
To begin, first make sure git is installed on your system and you are using version 1.4.1 or newer (should only be an issue with very old/stable distros):
If git is not installed, download and install it using your distribution's package manager. For example, to install git in Ubuntu use:
sudo apt-get install git
To save lots of time during the regression testing, you might want to consider installing ccache, which can cache some compilation steps to avoid redundant work. You can probably find ccache using your distro's package manager. For example, on Ubuntu, simply use:
sudo apt-get install ccache
With git and ccache installed, you should be able to clone the Wine source code to a directory of your choice ("wine-git" is used in this page's examples) with the following command:
git clone git://source.winehq.org/git/wine.git wine-git/ cd wine-git/
The Wine source tree is large (hundreds of megabytes) so downloading and initializing the repository will take some time. If you are behind a firewall, you may also need to replace git: with http: in the remote address. Now that you have a bleeding-edge copy of the source code, we can begin testing.
Just to check that the regression hasn't already been fixed in a very recent patch, you will probably want to compile Wine. This also seeds ccache and ensures that you have all the proper build dependencies. First, run the configure script inside your Wine repository with the appropriate options:
CC="ccache gcc" ./configure --verbose --disable-tests
Reassigning the CC variable enables ccache by default every time you recompile, and the --disable-tests option will also save the time that would be used to compile Wine's test suite (which shouldn't be necessary for testing regressions). The WineTestBot system is usually used to check the test suite itself for regressions.
Also, if you have a 64-bit processor, you will need to do some steps differently to avoid errors. WineOn64bit has more information, including for specific distributions, but generally you will want to run configure using something like this:
CC="ccache gcc -m32" ./configure --verbose --disable-tests
Regardless of your processor, unless you've compiled Wine before, configure will probably return some errors due to missing dependencies. With some distros, you can use the package manager to quickly install all dependencies. For example, on Debian-based distros, you can use:
sudo apt-get build-dep wine wine-dev
For information on other distros and detailed lists, see Recommended Packages. After installing dependencies, run the .configure/ command again, and repeat this process until you receive no errors.
After a successful run of configure, the makefile in your repository should be setup properly, and you can build wine by simply entering make. Compilation will take some time, depending on the speed of your hardware. Some computers take as few as 3 minutes, while some may take hours, though 20 to 40 minutes seems about average. Running make install after compiling is not recommended. Not only will it cause conflicts in your system as you test different versions of Wine over the course of the bisection, but it will interfere with any stable version of Wine you already have installed.
Once Wine finishes compiling, you'll want to test for the bug. To be safe, test with a clean .wine directory, which can be done by either backing up the existing wine directory or switching to a new wineprefix (if using a different wineprefix, remember that the wine directory resets to default once you end the terminal session):
mv ~/.wine ~/.wine-backup
Note: Some bugs can be suppressed simply by giving a program a fresh .wine directory of its own.
Now, install your application from scratch, and make sure that you're running the git version of Wine by invoking it with a full path:
instead of just
Finally run your installed program (again making sure to invoke the built-from-source version of Wine):
./wine "C:\Program Files\Program Name\program.exe"
Hopefully, your bug has been already fixed, in which case you can use the git version to run your program until the next release. If not, you will have to run the bisection to pin down the cause of the regression.
Running the Bisection
Some Preliminary Notes
If you don't remember which version of Wine you were using when the program last worked, you can try finding it by installing archived binary packages of Wine (e.g. from http://wine.budgetdedicated.com/archive/index.html). Eliminating as many early versions of Wine from the bisection as possible allows testing a smaller set of revisions. It can also help you avoid building very old versions of Wine, which are a headache to compile due to major changes in Wine's design and dependencies.
Also, you don't need an internet connection while doing the regression test. The bisection will run entirely within your local git repository.
Suppose that you have a bug that was introduced when upgrading from Wine 0.9.36 to Wine 0.9.37 (these numbers are release tags; for a list of release tags in use, see here). The following command will setup git to test for your bug between these releases:
git bisect start git bisect good wine-0.9.36 git bisect bad wine-0.9.37
Sometimes, however, you may know exactly which component the bad patch was in, if so, you can tell git this. Omitting the tag parameters from the bad and good commands respectively tells git that the most recent version is broken (very likely) and that even the earliest revision should be tested (not recommended, see notes above). For example, to tell git that the problem is in the wined3d dll component, and the problem wasn't present in Wine 0.9.38 but is in the current version, use:
git bisect start dlls/wined3d git bisect good wine-0.9.38 git bisect bad
Git will then tell you the number of commits that will be tested in the interval. Don't worry if it seems large, it won't take that many tests :-). Git will revert the source to the version between the two end-points (good and bad). For example, if you have 100 commits to test, it will position the source at the 50th commit. At this point you will recompile the Wine source code with make. While it shouldn't always be necessary to rerun './configure' too, if you want to be safe (which might be good if you're testing over a large interval), you can run both in one command:
./configure --verbose && make
If the version you are testing fails to compile (or cannot be tested for some other reason), enter:
git bisect skip
Then try running make again. Repeat this as many times as necessary until Wine successfully compiles. This can particularly cause problems with old versions of Wine because of changes to freetype (this mailing list discussion explains why and includes a patch).
Once you've successfully recompiled Wine, run your program and test for your bug. If the bug is still present, you know that the problems started somewhere among the older 50 patches, not in the newer 50. To tell git this, issue the command:
git bisect bad
If the bug wasn't present, you know that the regression was caused by one of newer 50 patches. To tell git this, issue the command:
git bisect good
These commands tell git to ignore the half of the interval that does not need testing, then reposition the source code at the midpoint of the remaining patches. At this point, you simply need to continue repeating the process, recompiling Wine, testing for the bug, then notifying git whether the bug was present or not. After a few tests, git will eventually identify the bad patch, and output something like this:
a460a2df43aa8eae10b1db028c6020829b009c54 is first bad commit commit a460a2df43aa8eae10b1db028c6020829b009c54 Author: Stefan Doesinger <email@example.com> Date: Sat Jun 9 14:27:41 2007 +0200 wined3d: Store the gl information in a per adapter structure and initialize it only once. :040000 040000 d8ae35832fcdbca8de07acae73b9e21564ced413 1720cc38fb598110071c9ee4f21f8f61b6f764c3 M dlls
If you do not see a message telling you the hash of the first bad commit, but something like this instead:
Bisecting: 0 revisions left to test after this
you are not done yet. This message means you have pinpointed a specific patch but still need to test if it is the last good or first bad commit so compile and test one more time.
If all you get are "good" tests (the bug fails to show), git's final output may have a line reading "Release x.x.xx" and look like this:
b821e839bb33ac8f56939cc582010ecf4d9c25d4 is first bad commit commit b821e839bb33ac8f56939cc582010ecf4d9c25d4 Author: Alexandre Julliard <firstname.lastname@example.org> Date: Fri Mar 21 16:41:33 2008 +0100 Release 0.9.58. :100644 100644 9123c03a3138b05cb8ebb5271f554bb76510cd09 3b88d88dcdfc8e148f8e7e0858bf0ca62c0bdff3 M ANNOUNCE :100644 100644 900c8932cb5aad58e928a5c3192ab95967dc0664 e001d501bec609c31c5a91ab185a06ef1662f4c8 M ChangeLog :100644 100644 5614cdd9b3c6af6d44027f067fcc423e49c49c91 36e035642c055736e2f833210f5db334a6706486 M VERSION :100755 100755 a516335cb3e4c67298f285adbdb2ede09da133be 51a9fd0b9741b28a588e2dd3bb57ae2be8805af2 M configure
This probably means the regression actually occurs outside of the interval you've given. This particular output is just a version tag, meaning that no real code was changed (and cannot have made your problem appear). You will need to reset your bisection (see below) and use that "Release x.x.xx" as your first good bisect (wine-x.x.xx).
Contact the Developer
Once you have identified which patch is causing the regression, post the information to any BugReports in bugzilla (enter a new report if one hasn't already been filed). Also, be sure to CC the author of the patch when you post to the bug report. This will allow the developers to fix the problem much quicker.
Resetting the bisect
Once you've finished with a test, you may want to check something else or simply use the latest git version. If you try to start a new bisection before resetting, git-bisect will fail with "won't bisect on seeked tree." Also, the bisection process causes git to leave your branches so to reset your git repository and return to the default branch, use:
git bisect reset git checkout master
Working with Developers
Reverting the patch
If the bisect identifies a patch that a developer believes is harmless, you may be asked to check your result by reverting that patch. First, reset your bisect if you haven't already, then use the revert command with the SHA1 ID of the bad patch:
git show b821e839bb33ac8f56939cc582010ecf4d9c25d4 | patch -p1 -R
Rebuild Wine and test your program again. When you're done testing, be sure to reset your tree to the latest Wine commit:
git reset --hard HEAD
Patching your git tree
Now suppose a developer posts a new patch that they want you to test. Though this may seem overwhelming, it's quite simple. Simply download the patch (likely from Bugzilla, or possibly from e-mail) and copy it to the top-level directory of your git repository. Then run:
patch -p1 < patch_name.diff
This will patch the source code and if successful, should output a confirmation listing the directories that have been message.
See, wasn't that hard! Now if you're going to be testing any other programs, you don't want your tree cluttered with patches you were testing for another program. To undo all patches to your git tree, run:
git reset --hard origin
This will reset all commits you've made, but this shouldn't be an issue if you're only testing and not developing patches of your own.
Updating your git tree
Let's assume that some time has passed, and a bug you've been following is now reported to work in the latest source version of Wine. If you want to test this, you need to update your git repository and compile the new version. Updating consists of two steps, first downloading any new patches, then syncing your local repository to point to the latest revision:
git fetch git rebase origin
Once that's done, just compile Wine again and test. If there was a fix for your bug in one of the new patches, your program should now work!
Automating the Bisection
If the regression is something easily scripted (e.g. a broken compile, a program that crashes without any user interaction, etc.), you can use a script to automate git-bisect. For instance, if 'winetricks dotnet11' crashes for you in 1.1.44, but not 1.1.43, you would setup the bisection interval like normal, but then run a script:
git bisect start git bisect good wine-1.1.43 git bisect bad wine-1.1.44 git bisect run ./foo.sh
The script foo.sh should look something like:
#!/bin/sh ./configure --disable-tests || exit 125 make || exit 125 rm -rf $HOME/.wine || exit 125 WINE=$HOME/wine-git/wine winetricks -q dotnet11
The key point is that git decides what to do at each step based on error codes. The script should exit with a non-zero status for a failure, and with zero for success. If Wine fails, it will pass the error code for you, but all other steps in the script should exit with 125 on failure. Error code 125 tells git to skip a patch instead of registering it as "bad."
Testing a broken compile
If the regression you're testing for is a broken compilation, it should be easy to automate the bisection as shown above. One major difference is that you should not pass error code 125 if make fails (because you want to mark compiler failures, not skip them):
#!/bin/sh ./configure --disable-tests || exit 125 make
Disabling optimization to speed up compilation
When compiling Wine, a large portion of the build time is spent optimizing code. Unless you're testing for performance issues, this becomes unnecessary when running a bisection. You might be able to speed up compilation substantially by skipping optimization. This can be done by passing a few flags to configure on the command line, like so:
CC="ccache gcc" CFLAGS="-g -O0" ./configure --verbose
Disabling tests to speed up compilation
When building a plain vanilla version of Wine from source, compiling the test suite also takes up a good deal of time. While these tests are invaluable for development, they are not needed for regression testing (we already know something broke, so conformance is irrelevant).
If your last known "good" version is older, a small hack is needed. This patch works for versions of Wine up to around 1.1.3:
diff --git a/dlls/Makefile.in b/dlls/Makefile.in index d7b0976..2b4b779 100644 --- a/dlls/Makefile.in +++ b/dlls/Makefile.in @@ -332,7 +332,7 @@ SUBDIRS = \ winequartz.drv \ winex11.drv -BUILDSUBDIRS = $(BASEDIRS) $(EXTRADIRS) $(TESTSUBDIRS) +BUILDSUBDIRS = $(BASEDIRS) $(EXTRADIRS) INSTALLSUBDIRS = $(BASEDIRS) $(EXTRADIRS) $(IMPLIBSUBDIRS) DOCSUBDIRS = $(BASEDIRS) $(EXTRADIRS) diff --git a/programs/Makefile.in b/programs/Makefile.in index 3c128e1..72dbdb8 100644 --- a/programs/Makefile.in +++ b/programs/Makefile.in @@ -41,7 +41,6 @@ SUBDIRS = \ winemenubuilder \ winemine \ winepath \ - winetest \ winevdm \ winhelp \ winver \ -- 126.96.36.199
If you're testing Wine versions between 1.1.3 and 1.1.9, use this patch instead:
diff --git a/dlls/Makefile.in b/dlls/Makefile.in index 6680673..e998a38 100644 --- a/dlls/Makefile.in +++ b/dlls/Makefile.in @@ -9,9 +9,8 @@ INSTALLDIRS = $(DESTDIR)$(dlldir) DLLSUBDIRS = @ALL_DLL_DIRS@ IMPLIBSUBDIRS = @ALL_IMPLIB_DIRS@ -TESTSUBDIRS = @ALL_TEST_DIRS@ -SUBDIRS = $(DLLSUBDIRS) $(IMPLIBSUBDIRS) $(TESTSUBDIRS) -BUILDSUBDIRS = $(DLLSUBDIRS) $(TESTSUBDIRS) +SUBDIRS = $(DLLSUBDIRS) $(IMPLIBSUBDIRS) +BUILDSUBDIRS = $(DLLSUBDIRS) INSTALLSUBDIRS = $(DLLSUBDIRS) $(IMPLIBSUBDIRS) DOCSUBDIRS = $(DLLSUBDIRS) @@ -445,8 +444,6 @@ CROSS_IMPLIBS = \ wsock32/libwsock32.a \ wtsapi32/libwtsapi32.a -$(TESTSUBDIRS:%=%/__crosstest__): $(CROSS_IMPLIBS) - implib: $(IMPORT_LIBS) .PHONY: implib diff --git a/programs/Makefile.in b/programs/Makefile.in index 7bd60b2..e5edef4 100644 --- a/programs/Makefile.in +++ b/programs/Makefile.in @@ -38,7 +38,3 @@ install install-lib:: install-progs$(DLLEXT) $(INSTALLDIRS) uninstall:: -cd $(DESTDIR)$(bindir) && $(RM) wineapploader $(INSTALLPROGS) -rmdir $(DESTDIR)$(dlldir) - -# Rules for testing - -check test:: $(SUBDIRS:%=%/__test__) diff --git a/programs/winetest/Makefile.in b/programs/winetest/Makefile.in index d153c04..3dd7bcd 100644 --- a/programs/winetest/Makefile.in +++ b/programs/winetest/Makefile.in @@ -21,10 +21,6 @@ SVG_SRCS = winetest.svg @MAKE_PROG_RULES@ -ALL_TEST_DIRS = @ALL_TEST_DIRS@ - -TESTBINS = $(ALL_TEST_DIRS:%/tests=%_test.exe) - @ALL_WINETEST_DEPENDS@ # Special rules -- 188.8.131.52
However, care must be taken when using these patches. Git doesn't like you editing the tree in the middle of a bisection. So to disable tests while bisecting old versions of Wine, use this little trick everytime you recompile Wine in the bisection:
patch -p1 < disable_test_patch.diff && CC="ccache gcc" ./configure && make depend && make && patch -p1 -R < disable_test_patch.diff
Test your app and use the git-bisect good and bad commands as usual. The alternate recompilation command applies one of the patches above (be sure to download the proper one and invoke it with the name you saved it under), compiles Wine, then reverses the patch, leaving git none the wiser.
If you are having problems with regression testing, you might want to try double-checking the git documentation first of all. Another possibility is asking for help on one of Wine's IRC channels. If you are particularly having trouble compiling or running an older version of Wine, odds are the instructions in ReverseRegressionTesting will be able to help you.
You can see a list of regressions that haven't been bisected and how many regressions different developers have pinpointed here.